Description

Hella EuroLED Touch Red/White Interior Lamp – Black Shroud

Building on the durability and power saving benefits of EuroLED® single LED lamps, EuroLED®Touch interior lamps provide dual colour red and white light to help maintain night vision onboard (see below). These new lamps are controlled by the latest touch sensitive switching and dimming technology. Lighting control is beautifully simple with EuroLED®Touch lamps. Touch the red pad for red light, the white pad for white light. Hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required. EuroLED®Touch lamps can also be remotely operated from multiple points with off the shelf ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will make the lamps synchronise to the same dimming level. Moreover, both light levels are remembered by the lamps circuitry, even when a vessels batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption. Advanced Hella Marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source.
The durability of EuroLED®Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt^TM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
EuroLED®Touch lamps overcome the poor reliability and light output problems of traditional red sleeved bulb lamps. These lamps provide ultra reliable, power saving, dual colour lighting for all types of commercial and recreational applications.

Specification:

• Installation: Pre-wired with 2.5m of 3 core marine cable.
• Protective System: IP 6K6 6K7.
• Mounting: Surface mount.
• Light Source: White – Single LED / Red – Multiple LEDs.
• Power Consumption: White – Less than 3W Red – Less than 1.5W.
• Operating Voltage: Multivolt^TM 9-33V DC.
• Protection: Spike protected Protected to +200 volts, Over voltage protected to +200 volts, Reverse polarity protected to -700 volts.

Dimensions: Ø A: 129.5mm – B: 29.5mm.